PROGRAMME
Programme
IV International scientific conference
REFERENCE MATERIALS IN MEASUREMENT AND TECHNOLOGY
IV International scientific conference
REFERENCE MATERIALS IN MEASUREMENT AND TECHNOLOGY
1 – 3 December 2020, Saint Petersburg, Russia
PLENARY SESSION
Chairperson: Sergei V. Medvedevskikh
D.I. Mendeleyev Institute for Metrology
Current state of the reference materials tests field. Standard substruction of UNIIM for metrological traceability assurance
Sobina E.P., Medvedevskikh S.V., Kremleva O.N.
Video Presentation Abstract
Metrological support of nucleic acids measurements
Vonsky M.S., Runov A.L., Kustikov Yu.A.
Video Presentation Abstract
Correlation of test results of a chemical composition and human errors
Kuselman I.
Video Presentation Abstract
Plant-matrix certified reference materials – a tool for ensuring the uniformity of chemical measurements
Vasileva I.E., Shabanova E.V.
Video Presentation Abstract Article in Russ Article in Eng
Non-conformities of provisions of reference material regulatory documents
Anchutina E.A.
Video Presentation Abstract
SESSION 1
STATUTORY REGULATIONS IN THE FIELD OF REFERENCE MATERIALS. GENERAL ISSUES
Chairperson: Egor P. Sobina
UNIIM - Affiliated Branch of the D.I. Mendeleyev Institute for Metrology
Non-conformities of provisions of reference material regulatory documents
Anchutina E.A.
Video Presentation Abstract
Metrology for stable isotope measurements
Chubchenko I.K., Kolobova A.V.
Abstract
Verification of purchased products, including reference materials, in accordance with GOST ISO / IEC 17025-2019
Kozlova O.V.
Video Presentation Abstract
Overview of statutory basis for works on reference materials
Kremleva O.N., Medvedevskikh S.V., Sobina E.P.
Video Presentation Abstract
Requirements for reference material used in the laboratory in accordance with federal law No. 102 of 26.06.2008, GOST ISO/IEC 17025-2019, test methods and accreditation criteria. risks for laboratories due to differences in requirements
Falkin D.V.
Video Presentation Abstract
Automation of the process of processing the results of participation in proficiency testing scheme
Vasina E. V., Fritsler E. U
Video Abstract
Implementation of the needs of the enterprise in interlaboratory relative tests through accredited providers. Federal accreditation service policy regarding qualification verification by interlaboratory distance testing. Platform for verification of laboratories 'qualifications
Belov A.V.
Video Presentation Abstract
Development of reference materials direction in JSC «Krastsvetmet»
Shleyning A.P., Shatnykh K.А., Frolov V.A.
Video Presentation
SESSION 2
REFERENCE MATERIALS IN MEDICAL SCIENCE
Chairperson: Maxim S. Vonsky
D.I. Mendeleyev All-Russian Research Institute for Metrology
Ensuring the uniformity of measurements in the field of laboratory medicine. Development of a standard glucose sample in blood serum
Griazskikh N.Y., Ziablikova I.N., Ivanov A.V., Shobina A.N.
Video Presentation Abstract
DNA reference materials for provision of nucleic acid measurement results metrological traceability
Runov A.L., Kurchakova E.V., Vonsky M.S. .
Video Presentation Abstract
Unusual use of the reference materials for composition of blood containing mercury (GSO 9653-2010)
Malov А.M., Ŝegolihin D.K., Sibiryakov V.K.
Video Abstract
Ensuring the uniformity of measurements in the field of luminescence. Reference materials for aqueous solution of adenosine triphosphate sodium
Ziablikova I.N., Ivanov A.V., Chugunova M.M., Shobina A.N.
Video Presentation Abstract Article in Russ Article in Eng
Actual problems in cell analysis reference materials development
Runov A.L., Shevchenko N. N., Goryachaya T.S., Kurchakova E.V., Vonsky M.S.
Video Presentation Abstract
SESSION 3
LIFE QUALITY
Chairperson: Maria Yu. Medvedevskikh
UNIIM - Affiliated branch of the D.I. Mendeleyev Institute for Metrology
Metrology for life sciences and healthcare: the need and progress in developing SI-traceable reference materials for high resolution microscopy measurements
Kepiro I.E., Ryadnov M.G.
Presentation Abstract
Development of complex for metrological support of food industry
Sergeeva A.S., Vostrikova N.L., Medvedevskikh M.Yu .
Video Presentation Abstract Article in Russ Article in Eng
Application of the lyophilization system for preparation of reference materials for composition of nutrition products
Medvedevskykh M.Yu., Vostrikova N.L., Sergeyeva A.S., Studenok V.V.
Video Presentation Abstract Article in Russ Article in Eng
Development of certified reference materials for measuring priority organotin compounds in materials and environmental objects
Smirnov V.V., Krylov A.I.. Belyakov M.V., Tkachenko I.Ju.
Abstract
Metrological assurance of enzyme multiplied immunoassay. Current stage and development prospects
Studenok V.V., Medvedevskykh M.Yu., Sergeyeva A.S.
Video Presentation Abstract
«PLANTS» cluster features in rm collection of IGC SB RAS
Shabanova E.V., Vasil'evaa I.E., Zak A. A., Tausenev D.S., Scherbarthc S., Pierauc U., Khomutova Marina Y.
Video Presentation Abstract Article in Russ Article in Eng
Metrological assurance of phthalates content measurements. Certified reference material of six priority phthalates in methanol
Budko A.G., Mikheeva A.Y., Tkachenko I.Y., Krylov A.I.
Video Presentation Abstract Article in Russ Article in Eng
SESSION 4
DEVELOPMENT OF NEW RMS INCLUDING PHYSICAL PROPERTIES AND ITS IMPLEMENTATION
Chairperson: Olga N. Kremleva
UNIIM - Affiliated Branch of the D.I. Mendeleyev Institute for Metrology
Recent developments in the certification of organic reference materials by 1H, 31P and 19F quantitative nuclear magnetic resonance (qNMR)
Rueck A., Hellriegel C., Breitruck K., Obkircher M.
Video Abstract Article in Eng
Purity assessment of potassium iodate by coulometric titration and by the analysis of impurities
Sobina A.V., Sobina E.P., Shimolin A.Yu.
Video Presentation Abstract
Development of a multi-component standard sample for verification and calibration of inductively coupled plasma mass spectrometers
Ermakova I.I., Ivanov A.V., Ziablikova I.N., Shobina A.N.
Presentation Abstract
Graduation of AMR-1006M NMR analyzers using natural samples and samples-imitators
Agafonov O.S., Prudnikov S.M. .
Video Presentation Abstract Article in Russ Article in Eng
SESSION 4
DEVELOPMENT OF NEW RMS INCLUDING PHYSICAL PROPERTIES AND ITS IMPLEMENTATION
Chairperson: Anastasia A. Neklyudova
D.I. Mendeleyev Institute for Metrology
About new reference materials density and viscosity
Demyanov A. A., Neklyudova A. A.
Presentation Abstract Article
Development of reference materials for gas permeability
Aronov I. P., Sobina E.P.
Video Presentation Abstract Article in Russ Article in Eng
Development of a new data processing algorithm for measuring the absolute gas permeability coefficient
Aronov P. M., Aronov I.P., Sobina E.P.
Video Presentation Abstract
Development new types of certified reference materials with thermodynamic properties for metrological support of measurements in the field of thermal analysis and calorimetry in the Russian Federation
Nepomiluev A.M., Kazantsev V.V., Shipitsyn A. P.
Vidio Presentation Abstract
Developed new generation of certified reference materials for metrological support in the field of surface density and coating thickness measurements
Kazantsev V.V., Vasilev A.S.
Video Abstract
Zeolites – promising candidate material for creating comparison standards with recoverable properties
Medvedevskikh M.Yu. , Kasilyunas A.V.
Presentation Abstract
Development of reference materials for optical nanosensor systems
Anna A. Yushina, Michael K. Alenichev
Video Presentation Abstract Article in Russ Article in Eng
Traceability of measurements of mechanical stresses by acoustoelastic method based on reference material
Tolmachev V.V., Matveeva I.N.
Video Presentation Abstract Article in Russ Article in Eng
Astimation of homogeneity bismuth-containing glassy reference materifls astimation of homogeneity bismuth-containing glassy reference materials
Kutvitskiy V.A., Borisova V.V., Mironova E.V., Romanova I.A.
Presentation Abstract
Ensuring integrity and reliability of mass measurements with CUBIS 2 balances
Milokumov V. S., Arbenina E.E.
Video Presentation Abstract
UNIIM results of participation in a key comparison of copper calibration solutions prepared by national metrological institutes
V. M. Zyskin, P. V. Migal, A.V. Sobina, A. Yu. Shimolin
Abstract
Research for homogeneity of impurity distribution in RMs
Shlaying A.P., Schetny K.A., Frolov V.A.
Presentation
Work on production of reference materials, executed joint-stock company «Western-Siberian Testing center» in 2019-2020
Shushunova S.N.
Video Presentation Abstract
РOSTER SESSION
Chairperson: Olga N. Kremleva
UNIIM - Affiliated Branch of the D.I. Mendeleyev Institute for Metrology
Overview and analysis of the industry base of CRM included in the industry register of CRMs accepted (recommended) for application in laboratory analytical support of geological exploration for solid minerals
Lebedeva M.I., Kit A.Yu.
Abstract
Development of the approved type reference material of plutonium dioxide mass fraction and isotopic composition and its application
Chukhlantseva Е.V., Tadevosyan Yu.А., Starovoytova О.V.,
Stepanova О.V.,Semyonov М.А., Plekhanov V.V., Maksimova I.М.
Abstract
Development and testing of a multi-element ICP standard
Stolboushkina T.P., Stakheev A. A.
Abstract Article in Russ Article in Eng
About the metrological assurance of the gas calorimeters and Wobbe index analyzers
Mishina K..A., Korchagina E.N., Kazartcev Y.V., Kolobova A.V.
Abstract Article in Russ Статья EN
Production of ethanol water solutions reference materials in FBI «State Regional Center for standardization, metrology and testing in the Nizhny Novgorod region»
Ignatev R.A., Zavodskoy M.V.
Abstract
Development of reference materials for various chemical structure pharmaceuticals
Gegechkori V.I.
Статья RU Article in Eng
Results of 20-year practice of holding interlaboratory comparison tests of coal and fuel oil samples
Korchagina E.N., Mishina K.A., Zarechnova A. A.
Abstract Article in Russ Article in Eng
Development of reference materials of composition at JSC IRGIREDMET
Kozlova S.A., Zelenkova A.V., Prokopyeva S.V.
Abstract
END OF THE CONFERENCE Video
ANSWERS ON QUESTIONS Video
III International scientific conference
REFERENCE MATERIALS IN MEASUREMENT AND TECHNOLOGY
September 11-14, 2018, Ekaterinburg, Russia
Reference materials of the Russian Federation: Strategy of ensuring the uniformity of measurements until 2025
Medvedevskikh S. V., Kremleva O. N.
Abstract
On calibration and measurement capabilities of COOMET national metrological institutes in the field of physical and chemical measurements
Konopelko L. A., Kustikov Y. A., Okrepilov M. V., Pronin A. N.
Abstract
International cooperation in the field of reference materials for laboratory medicine
Baturin А. S., Muravskaya N. P.
Abstract
State Register of approved type reference materials of the Russian Federation
Agisheva S. A., Kremleva O. N., Suslova V. V.
Abstract
The state of affairs and problematic issues in conducting ILC at medical laboratories
Malakhov V. N.
Activity of VNIIFTRI in the field of physical-chemical measurements
Dobrovolskiy V. I., Oganyan N. G., Prokunin S.V.
Abstract Article
SESSION 1
INTERNATIONAL SESSION
Chairperson: Wolfram Bremser, BAM
Forthcoming Endeavours of ISO/REMCO
Wolfram Bremser
Abstract
Harmonised guidance for the producers and users of reference materials –
the current status and future prospects
Angelique Botha
Abstract
Evaluating long-term capability in primary pH metrology using techniques of the CCQM key comparisons in pH
Kenneth W. Pratt
Abstract
Combined measurement uncertainty for pH-values using certified reference materials in potentiometric measurements with glass electrodes
Samuel Wunderli
Abstract Article
Bayesian methods in the certification of reference materials
Adriaan M.H. van der Veen
Abstract
COMAR, where do you go?
Johannes van de Kreeke, Rita Pradel
Abstract
Conformity assessment of multicomponent materials - who and why takes risks?
Ilya Kuselman, Francesca R. Pennecchi, Ricardo J. N. B. da Silva, D. Brynn Hibbert
Abstract
Validation of methods for the determination of qualitative properties
Wolfram Bremser, Wulf Menzel
Abstract
SESSION 2
GENERAL ISSUES IN THE FIELD OF REFERENCE MATERIALS
Chairperson: Olga N. Kremleva, UNIIM, Russia
Falsification of certified reference materials. How to identify and how to fight?
Pripisnova V. A., Atanov A. N.
Abstract
Interlaboratory comparison tests – the main tool of competence assessment
Belov A.V.
Abstract
VNIIFTRI's participation in international comparisons in the field of physical-chemical measurements
Dobrovolskiy V.I., Oganyan N.G., Prokunin S.V., Stakheev A.A.
Abstract
Analysis of the industry base of certified reference materials of mineral raw materials
Lebedeva M. I., Kit A. Yu.
Abstract
Procedures for the management of reagents and reference materials at the laboratory in accordance with ISO/IEC 17025:2017
Falkin D.V.
Abstract
Experience in implementing a quality system of the ores and rocks reference material producer in Minstandarts
Moshkova M. V., Demchenko A. S.
Abstract
Problem of comparability of characteristics of certified reference materials – gas mixtures of the same kind, produced by different enterprises
Konopelko L.A., Kolobova A.V., Fatina O.V.
Abstract Article
SESSION 3
GEOLOGY, METALLURGY
Chairperson: Irina E. Vasil’eva, IGC SB RAS, Russia
Multiparametric reference materials required for analysis of geological samples on precious metals
Vasil’eva I. E., Shabanova E. V., Dreglea A. I.
Abstract
Development, production, testing and use of certified reference materials for metallurgical production
Stepanovskikh V. V.
Abstract
Reference material producer - VIMS: key aspects of ensuring the quality of certified reference materials of solid mineral resources
Lebedeva M. I.
Abstract
Production and certification of reference materials of boron mass fraction in silumin
Lisienko D. G., Dombrowskaya M. A., Kubrina E. D.
Abstract Article
Development of a certified reference material of hydrogen mass fraction in titanium hydride
Zasukhin A. S., Sobina E. P., Migal P. V.
Abstract
Technique of controlling the content of Ce and Gd in YGAG:Ce powders by means of inductively coupled plasma mass spectrometry
Lisovskii S. V.
Abstract
SESSION 4
MEDICINE, PHARMACEUTICALS
Chairperson: Elena V. Kulyabina, VNIIMS, Russia
Problems of reference materials of biological medicinal products
Olefir Y. V., Volkova R. A., Fadeikina O. V., Sakanyan E. I., Merkulov V. A., Movsesyants A. A., Bondarev V. P.
Abstract
Development of reference materials in the laboratory medicine.
Reference materials of electrolytes in the blood serum
Griazskikh N. Yu., Yermakova Y. I., Zyablikova I. N., Ivanov A. V.
Abstract
Application of raman spectroscopy with the purpose of drugs quality control in injection form
Krasheninina M.P., Medvedevskikh M.Yu., Il’ina Е.V., Galeev R.R.
Abstract Article
Reference materials to assess specific safety of preparations of immunoglobulins, and human albumin: development, validation and application
Kornilova O. G., Krivykh M. A., Volkova R. A., Borisevich I. B.
Abstract Article
Reference materials of catalytic activity as a means of providing the metrological traceability of measurement results. KATAL
Kulyabina E. V., Melkova O. N., Guskova E. A.
Abstract Article
SESSION 5
REFERENCE MATERIALS OF PHYSICAL PROPERTIES
Chairperson: Egor P. Sibina, UNIIM, Russia
Development of certified reference materials set of magnetic properties of hard magnetic materials based on NdFeB alloy
Volegova Е. A., Maslova Т. I., Malygin М. A., Vas`kovskiy V. O., Volegov A. S.
Abstract Article
Absorbed dose rate and absorbed dose transfer reference materials with dose measurement possibilities ranging from 50 to 1000 Gy
Emelyanenko I. A., Tenishev V. P..
Abstract Article
Multiparametric certified reference materials used for metrological support of coating parameters
Kazantsev V. V., Vasilyev A. S.
Abstract Article
New certified reference materials of liquid viscosity
Neklyudova A. A., Demyanov A. A.
Abstract
Validation of the test procedure for stretching in line with GOST 10446 with the use of a reference material of wire for quality control
Matveeva I. N., Tolmachev V. V.
Abstract
Perspectives of developing reference materials of thermodynamic properties for metrological support in the field of thermal analysis and calorimetry in the Russian Federation
Nepomiluev A.M., Kazantsev V.V., Shipitsyn A.P.
Abstract Article
Development of reference materials for porosity based on aluminium oxide for the method of mercury porosimetry
Sobina E.P.
Abstract Article
Metrological assurance of infrared analyzers of grain
Parfenova E. G., Molodykh S. N.
Abstract
Development of a certified reference material of the physical properties of soil clay (loam)
Matveeva I. N., Tolmachev V. V.
Abstract Article
SESSION 6
QUALITY OF LIFE
Chairperson: Мaria Yu. Medvedevskikh, UNIIM, Russia
Metrological assurance for dioxin measurements. Development of a new certified reference material of dioxin mass fraction in animal fat
Budko A. G., Mikheeva A. Yu., Krylov A. I.
Abstract Article
On the development of a certified reference material of gluten
Krasheninina M. P., Sergeeva A. S., Medvedevskikh M. Yu., Miluyshkin A. L., Shatalov I. S.
Abstract
A new multielement reference material for composition of pine needles
Shabanova E. V., Vasil’eva I. E., Zak A. A., Mustafina O. K.
Abstract
Development of interlaboratory comparison samples and reference materials for the quality assurance of air composition measurements
Bogacheva A. M.
Abstract Article
Reference materials on the natural basis in the fuel and energy complex of the Russian Federation
Eldetsova S. N., Kolesnikov A. F.
On the development of reference materials of food quality indicators
Medvedevskikh М. Yu., Krasheninina М. P., Sergeeva A. S., Nikonova N. A.
Abstract
SESSION 7
METROLOGICAL TRACEABILITY
Chairperson: Alena V. Sobina, UNIIM, Russia
Development of a certified reference material of 0.1 M potassium dichromate solution GSO 10992-2017
Shimolin A. Yu., Sobina A. V.
Abstract Article
Development of reference materials in the field of physical and chemical analysis. Reference materials for composition of aluminum, india, magnesium, nickel and titan aqueous ion solutions
Ermakova I. I., Ivanov A. V., Zyablikova I.N., Shobina A. N.
Abstract Article
Development of certified reference materials for mass fraction of elements in solid matrix for metrological assurance of x-ray fluorescence and atomic emission analysis
Kuznetsova M. F., Sobina A.V.
Isotope dilution mass spectrometry in the development of reference materials
Kremleva O. N., Tabatchikova T. N.
Abstract Article
Development and certification of ICP standard solution of lead
Stolboushkina T. P., Stakheev A. A.
Abstract Article
Proficiency testing with the established traceability to the national primary standard GET 176-2017
Sobina A. V.
Abstract
SESSION 8
MATHEMATICAL AND STATISTICAL SUPPORT FOR THE CHARACTERIZATION OF REFERENCE MATERIALS
Chairperson: Vyacheslav V. Kazantsev, UNIIM, Russia
Creation of a system for automatic monitoring and accounting of pollutant discharges into water objects
Medvedevskikh S. V., Kazantsev V. V., Medvedevskikh М. Yu., Sergeeva A. S.
Abstract
Evaluation of uncertainty of the certified value of multicomponent reference material
Migal P. V., Medvedevskikh S. V., Firsanov V. A.
Abstract Article
Methodological approaches to statistical evaluation of test results obtained during certification of reference materials used for biologicals quality evaluation
Fadeikina O. V., Volkova R. A.
Abstract
Estimation of consensus value of interlaboratory measurement results with minimum increase of associated uncertainty
Aronov P. М., Kremleva О. N.
Abstract Article
Estimation of material preparation quality of certified reference materials of solid wet substances
Medvedevskikh S. V., Krasheninina М. P., Medvedevskikh М. Yu.
Abstract Article
SESSION 9
APPLICATION ISSUES OF REFERENCE MATERIALS
Chairperson: Yuriy S. Bessonov, UNIIM, Russia
Use of bismuth-containing glassy reference materials for the determination of transition elements by the luminescence method
Borisova V. V., Kutvitsky V. A., Mironova E. V.
Abstract Article
Evaluating the effectiveness of corrective actions at the laboratory of non-destructive control
Zabelina A. A., Tolmachev V. V.
Abstract
Techniques for ambient air monitoring. Certification and organization of the intralaboratory quality control of measurements conducted using reference materials
Kropanev A. Yu.
Abstract
External control of the quality of food composition measurements using interlaboratory comparison materials
Ponomareva O. B., Kotov M. V.
Abstract
The practical use of reference materials for verifying measuring instruments
Svistunov I. N., Gorbunov R. A., Levin A. E.
Abstract
The use of a reference material to solve problems in assessing the quality of electrical steel in accordance with the requirements of Russian and foreign standards
Serdjukov S. V., Maslova T. I.
Abstract
The use of a reference material of asphalt-concrete mixture in the evaluation of personnel skills at a road construction laboratory
Chentsova Yu. S., Tolmachev V. V..
Abstract
THE PROGRAMME OF POSTER SESSION
Organization of interlaboratory comparisons for determining the indicators of the composition and properties of drinking, natural and purified waste water using reference materials
Goryaeva L. I., Fatkulina E. K.
Abstract
Development of a certified reference material for determining total alkalinity of natural water
Goryaeva L. I., Shchukina E. P., Fatkulina E. K.
Abstract
Reference materials used in the veterinary field
Gulyaeva A.Yu., Kis I. V., Kolyachkina S. V., Komarov A. A.
Abstract
Reference materials of the composition and properties for determination of quality parameters of petroleum and petroleum products
Demyanov A. A., Neklyudova A. A.
Abstract
Experience of an accredited laboratory in interlaboratory comparisons
Zelenkova A. V., Prokopyeva S. V., Stupakova E. V.
Abstract
On improving the accuracy of producing certified reference materials of iron (III) and copper (II) ion solutions
Zyskin V. M., Sobina A. V.
Abstract
On the development of certified reference materials for melting point of high-purity organic substances
Kazartcev Ya. V., Korchagina E. N., Mishina K. A., Shehovtsov D. A.
Abstract
Metrological support of gas adsorption analysis
Koryukova V.A., Sobina E.P.
Abstract
Possibility of developing a reference procedure or primary reference procedure to ensure traceability of measurements for mercury in gas media
Maksakova I. B., Smirnov V. V., Krylov A. I.
Abstract
Developing a certified reference material based on plutonium dioxide for total plutonium content
Marchuk A. Yu., Starovoytova O. V., Maximova I. M., Stepanova O. V.Tadevosyan Yu. A., Semyonov M. A., Chukhlantseva, E. V., Plekhanov V. V.
Abstract
The risk-based approach in the production of reference materials
Osintseva Е.V.
Abstract
Work on the production of certified reference materials, performed by Western-Siberian Testing Center in 2017-2018
Shushunova S. N.
Abstract
The activity of a specialized organization of the state service for reference materials of VNIItsvetmet institute
Yamchshikova L. N., Matyuschenko Ye. V.
Abstract
II International scientific conference
REFERENCE MATERIALS IN MEASUREMENT AND TECHNOLOGY
September 14-18, 2015, Ekaterinburg, Russia
PLENARY SESSION
Chairperson: S. Medvedevskikh, UNIIM (Russia)
Rosstandart: 90 years of struggling for quality!
S. Golubev
State service of reference materials of Russia - 45 years on duty for ensuring of the uniformity of measurements
S. Medvedevskikh
Risk of human error in chemical analysis
I. Kuselman
Endea vours of ISO/REMCO
W. Bremser
Recent works in the field of reference materials within CASCO, OIML, COOMET, Interstate Council
E. Оsintseva
Uses of reference materials
W. Bremser
SESSION 1
GENERAL ISSUES IN THE AREA OF RMS
Chairpersons: W. Bremser, BAM (Germany),
E. Osintseva, UNIIM (Russia)
Current status of legal support to main-stream metrology activities in Russia
V. Lahov
Accreditation requirements and practice in Russian national accreditation system in the field of ensuring the uniformity of measurements when testing reference materials for type approval
E. Pilugin
About international trends in the field of reference materials
E. Оsintseva
Primary reference measurement procedures and reference measurement procedures. Certification and use.
S. Medvedevskikh, Yu. Bessonov. О. Ponomareva
International methodological and regulatory collaboration in the field of analytical measurements metrology – EURACHEM in Russia
M. Medvedevskih, V. Baranovskaya
Reference materials in the field of testing laboratory competence assurance
V. Paneva, S. Shpakov
SESSION 2
METROLOGICAL TRACEABILITY
Chairpersons: V.Donbaeva, KazInMetr (Kazakhstan)
V. Lahov, VNIIMS (Russia)
The role of primary substances in reference material certification
S. Recknagel
System of metrological traceability of reference materials in the Russian Federation
E. Оsintseva
Measurement procedure for testing reference materials with the use of the national measurement standard GET 196-2011
N. Muravskaya, Ya. Ermakova and others
State standards of UNIIM for ensuring metrological traceability of composition and properties of certain substances and materials
E. Sobina
Reference materials – new opportunities to assure traceability at national and international levels
A.I. Krylov, L.A. Konopel'ko, I.Ju.Tkachenko
Traceability and mass fraction unit realization by reference materials for multicomponent coatings
V. Kazantsev, A. Vasiliev
SESSION 3
ECOLOGY, GEOLOGY
Chairpersons: I. Vasilyeva, IG SB RAS (Russia)
M. Zaletina, Eko-analytika (Russia
Importance of reference materials of natural and man-made media for geoanalysis
I. Vasilieva
Development of a reference material for water industry
M. Mazanova and others
Development of reference material of natural water composition, intended for accuracy control of ammonium ions mass concentration measurements
L. Goryaeva, E. Fatkulina
Reference materials for environmental pollution and food stuff control on the basis of solutions and liquids
L. Goryaeva, E. Fatkulina
Reference materials for environmental pollution and food stuff control on the basis of solutions and liquids
M. Zaletina, Yu. Zolotov and others
The impact of technological processes automation on the quality of rm manufacturing
A. Atanov, O.Boldina and others
Evaluation of water pollution by pesticides in Algeria
M. Hadjel, N. Berkok
Study of graine-size composition of certified reference materials of natural and man-made environments
I. Vasilieva, A. Busko and others
Process variation monitoring using double sampling scheme
Chung-Ming Yang, Su-Fen Yang and Gar-Wei Wang
Study of reference materials of natural and man-made composition by atomic emission spectrometry
E. Shabanova, I. Vasilieva and others
Peculiarities of development of departmental reference materials of mineral raw compound
M. Lebedeva and others
The production of reference materials by scientific and technical centre “Mineral standards” (“STC “Minstandart” LTD). Arising problems in the certification of reference materials
A. Demchenko
On the development of reference material of p,p’-DDT solution
M. Medvedevskikh, M. Krasheninina, and others
Development of reference material of pesticide lindane
E. Lebedeva, E. Sobina
SESSION 4
HEALTH, PHARMACY, VETERINARY
Chairpersons: V. Donbaeva, KazInMetr (Kazakhstan)
R. Volkova, CEMMA (Russia)
Chemical reference standards in pharmacopoeial analysis
T. Shemeryankina and others
The issues of estimating the uncertainty of testing methods for immunobiological preparations
R. Volkova, O. Fadeykina
Evaluation of uncertainty of certified characteristics of reference standards for biologicals quality assessment
O. Fadeykina and others
Development and production of reference materials of biologically active compounds for restricted application
A. Sosnov, B. Punkevich, S. Sadovnikov, F. Semhenko
SESSION 5
ESTIMATION OF UNCERTAINTY, APPLICATION OF RMS
Chairpersons: V. Donbaeva, KazInMetr (Kazakhstan)
A. Sobina, UNIIM (Russia)
Estimation of measurement uncertainty of the main component mass fraction using coulometric titration and titrimetry
A. Sobina, G. Terentiev
Uncertainty evaluation of reference materials - reference standards as a part of GET 176-2013 certified by controlled potential coulometry
V. Zyskin
Evaluation of uncertainty at certification pH certified reference materials - a primary reference buffer solution
V. Donbaeva
Estimation of measurement uncertainty based on internal quality control data of measurement results using reference materials
A. Stepanov
Use of reference materials in interlaboratory comparisons
S. Shpakov and others
Organization of intralaboratory quality control of quantitative chemical analysis results using reference materials
A. Kropanev and others
Certified reference materials of raw materials and materials of metallurgical production: state and problems
V. Stepanovskih and others
Manufacturing technologies of certified reference materials with composition of rare and rare earth elements ores
M. Lebedeva, A. Kit
Development and application of certified reference materials for spectral determination of rare-earth elements and impurities in heat-resisting nickel alloys
F. Karachevtsev and others
Certified reference materials of fine gold produced by JSC «Ekaterinburg non-ferrous metals processing plant» (EZ OCM)
M. Lisienko, E. Anchutina
SESSION 6
FERROUS AND NON-FERROUS RMS
Chairpersons: V. Stepanovskikh, ICRM (Russia)
F. Karachevtsev , VIAM (Russia)
Development of certified reference materials of nonferrous metals and alloys at LLC «VICTORY-STANDART»
N. Sergienko and others
Development and application of certified reference materials of composition of perspective aluminium and aluminium-lithium alloys for spectral analysis
F. Karachevtsev and others
Rating of laboratories involved in interlaboratory tests for reference material certification
E. Anchutina, R. Askarova
Reference materials as a tool to improve the quality of precious metals analyses
K. Shatnyh
SESSION 7
ENERGY AND FUEL INDUSTRY, FIRE SAFETY
Chairpersons: V. Kazantsev, UNIIM (Russia)
S. Novakov, UECC, (Russia)
On new regulatory documents relating tо metrological assurance within Rosatom state corporation
S. Novakov, К. Zaitzev
Reference materials of nuclear materials for non-destructive analysis: experience in development and application
A. Tellin and others
Control samples in the method for measuring the distribution of uranium and transuranic elements in the target for production of reactor nuclides
Yu. Leschenko
Creating and metrological characteristics evaluation of reference materials of potassium fluorozirconate
D. Lisienko and others
Problems of development and application of а range of RMs in the laboratory testing of oil, gas condensate and oil products
A. Kolesnikov, S. Eldetsova
About the development of reference materials of coal
O. Golynets, S. Apshtein
Current developments of state reference materials of fire-retardant agents and fire-proof materials on the basis of the Register of fire-retardant agents and fire-proof materials passed identification in the National Union of Organizations in the Field of Ensuring Fire Safety
A. Pyatov
SESSION 8
PHYSICAL PROPERTIES OF MATERIALS
Chairpersons: E. Sobina, UNIIM (Russia)
Development of a reference material of the sorption properties of zeolite
E. Sobina
Methods and approaches for description of porous carriers for active media
O. Shilova and others
Role of certified reference materials in ensuring the traceabaility of the optical properties of single crystals and preparations on their basis
Zh. Goreeva and others
Problems of automation of GET 67-2013 for testing of reference materials for thermophysical properties of solids
V. Kazantsev, V. Cherepanov
Application of RMs for analysis of results of measurement of specific power of magnetic losses in sheet specimens of oriented electrical steel, obtained using different methods
S. Serdjukov
SESSION 9
TRAINING IN THE FIELD OF RM
Chairpersons: Е. Оsintseva, UNIIM (Russia)
Department of Analytical Chemistry at Institute of Natural Sciences of Ural Federal University bearing the name of the first President of Russia B.N. Yeltsin
L. Neudachina
Professional training in the field of reference materials development and testing
Z. Babushkina, E. Rudnitskaja
RОUND TABLE
Round table devoted to the meeting of the working group of Industry service of reference materials of precious metals, their alloys and materials containing precious metals
Chairpersons: L. Gorbatova, EZ OCM (Russia)
E. Anchutina, EZ OCM (Russia)
THE PROGRAMME OF POSTER SESSION
Measurement assurance for infrared analyzers of agricultural materials
A. Zaporozhets, M. Myazina, E. Parfenova
Certified reference material: Ash content and bulk density - certification by preparation
V. Savyolov
Development of reference materials of portland cement clinker and cement
N. Mashkova, R. Stiharev, G.Terentiev and others
Development and validation of measurement methods for characterization of certified reference materials of potassium fluorozirconate
M. Dombrovskaya, D. Lisienko, O. Yagodina, A. Habarova
Creation and use of different types of reference materials of rocks, ores, soils for analytical support for exploration
I. Vaganov
Journal «Reference Materials»
N. Taraeva
Using of an Activated Carbon Prepared from South Algeria Date Palm Stone for purifying the WasteWater (Eloued-Area)
A.Kamarchou, B. A.Abelhafid, G. Messaoud
Certified reference material of moisture content and bulk density of blast-furnace coke –working out and application experience
V. Savyolov, A. Zaporozhets
Application of potassium nitrate standard solution in calibration analyzer for nitrogen determination in certified reference material of ferrochrome by fusion in a current of inert gas
Yu. Shahova, T. Endoberya, I. Zagorodnova
Application of atomic emission with inductively coupled plasma for certification analysis of reference materials of steels
V. Basyanova, G. Popkova, A. Lastochkina
Optimization of certified reference materials of steel nomenclature for spectral analysis
T. Ignatenko, M. Tretyakova, E. Laschenova
Development of certified reference material of amidosulfuric acid
A. Shimolin, G. Terentiev
On the certification of industry certified reference materials and in-plant certified reference materials of metallurgical production materials
E. Kotlavskaya and other
New types of state certified reference materials of ferrous metallurgy materials
V. Kozmin, and others
Use of certified reference material 9444-2009 of specific magnetization of iron-yttrium garnet for validation of computer experiment
T. Kulikova, E. Volegova and others
Determination elemental composition of gold-bearing ores reference materials using atomic emission spectrometry
A. Zelenkova and others
Optimization of reference material list necessary for metrological assurance of technical regulations of the Russian Federation and the Custom Union
E. Osintseva, Sh. Khismatullin, O. Kremleva, V. Studenok
I International scientific conference
REFERENCE MATERIALS IN MEASUREMENT AND TECHNOLOGY
September 10-14, 2013, Ekaterinburg, Russia
PLENARY SESSION
Chairperson S. Medvedevskikh, UNIIM (Russia)
Metrological traceability of measurement results (with particular emphasis on chemistry)
De Bièvre Paul
Endeavours of ISO/REMCO
Bremser W.
International cooperation on reference materials in the framework of the OIML, COOMET, Interstate Council for Standardization, Metrology and Certification
E. Оsintseva
COMAR – the international database for certified reference materials
Steiger T., Pradel R., Bremser W., Anchutina E.
SESSION 1
GENERAL ISSUES
Chairpersons: W. Bremser, BAM (Germany)
E. Osintseva, UNIIM (Russia)
Activities of state service of certified reference materials for composition and properties of Republic of Kazakhstan
V. Donbaeva, V. Mikhalchenko et al.
Abstract
The tasks of the State Service of Reference Materials of the Russian Federation
E. Оsintseva
METROLOGICAL TRACEABILITY
Traceability at the upper edge
Bremser W.
Methods and means of ensuring the traceability and quality of series-produced certified reference materials of composition of gas mixtures in cylinders under pressure in Russia
L. Konopelko, A. Kolobova
Certified reference materials of the hight purity chemicals. Condition and prospects of certified reference materials issued by GET 176-2010
A. Shimolin, G. Terentiev
Reference laboratories in the system of analytical measurements.
О. Ponomareva
Realization of traceability to the national standard GET 176-2010 in accordance with GOST 8.735.1-2011 by second category working standards - reference materials of cations and anions water solutions
Atanov A., Boldina O.
Pure substance as a principal way to establish traceability in inorganic chemical analysis
V. Baranovskaya, Yu. Karpov
SESSION 2
HEALTH, FOOD, PHARMACY, ECOLOGY
Chairpersons: V. Donbaeva, KazInMetr (Kazakhstan)
G. Stupakova, VNIIA (Russia)
On the metrological assurance of methods used for biologicals quality assessment
R.Volkova
Production and use of in-house reference material in quality assurance
Stoyke M., Gowik P., Radeck W., Polzer J.
Evaluation of uncertainty with regard to certified characteristic of reference material for bacterial suspensions opacity
O. Fadeykina et al.
History, achievements and present time of production of CRMs for inorganic trace analysis in Poland
Dybczyński R., Polkowska-Motrenko H., Samczyński Z.
Selecting sugarcane varieties for preparation of candidate reference materials
Martínez M.I.V., Fernandes E. A. De N., Bacchi M.A., Sarriés G.A.
Analytical standards of the company SigmaAldrich
A. Blagoder
Homogeneity study of a candidate reference material of tomato leaves using neutron activation analysis
Martínez M.I.V., Fernandes E. A. De N., Bacchi M. A., Kato L.S., Gonzaga C.L., Sarriés S.R.V., Elias C.
Development of reference materials for component composition of alcohol products
S. Cherepitsa
Reference materials for the food industry: production of authentic meat species reference materials
Holcombe G., Firth J.
Chemical characterization of brazilian beans for selecting a candidate reference material
Kato L. S., De Nadai Fernandes E. A., Bacchi M. A., Sarriés G. A.
SESSION 3
ENERGY, FUEL, MINERALS
Chairpersons: A. Kolobova, VNIIM (Russia)
M. Moshkova, VNIIMS (Russia)
Reference materials of «UKRMETRTESTSTANDART» included in verification schemes
М.Rozhnov, А.Glebov et al.
Production of the certified reference materials of solid minerals
M. Moshkova, M. Lebedeva
Methodological and technical support of matrix certified reference material production in geological branch
V. Styuf
The estimation of uncertainty of certified reference material for composition of bensene in motor petrol
V. Donbaeva et al.
Branch reference materials at the enterprises of «RosAtom» state corporation. History of development current situation, prospects for development
L. Karpyuk
SESSION 4
SOLUTIONS, MOISTURE OF MATERIALS
Chairpersons: A.Atanov, CSOVV (Russia)
Yu.Bessonov, UNIIM (Russia)
Problem of dependence of certified values on characterization method for reference materials of moisture mass fraction
М. Medvedevskikh, A. Sergeeva et al.
Development and certification of high-purity reference material solutions of lead and nickel
P. Migal et al.
Evaluation of the possibility of application of the theory of water sorption on solid and granular substances for the development of the reference material preparation procedure
М. Medvedevskikh et al.
SESSION 5
FERROUS AND NON-FERROUS REFERENCE MATERIALS
Chairpersons: V. Stepanovskikh, ICRM (Russia)
V. Baranovskay, Giredmet (Russia)
Certified reference materials for ferrous metallurgy products
V. Stepanovskikh
Development of certified reference materials of nickel alloys
A. Letov, F. Karachevtsev
Release of RM set for composition of iridium SOI-23
D. Lisienko et al.
Development of a certified reference material of mass fraction of metals in the slag copper production using GVET 196-1-2012
E. Gorbunova et al.
Development of certified reference material of lead nitrate using the method of controlled potential coulometry
V. Zyskin, G. Terentiev
Check samples for penetrant testing
N. Kalinichenko, I. Lobanova , А. Kalinichenko
Development of the system of certified reference material development for quality control of cobalt, nickel, copper and middling products, produced by OJSC «NORILSK NICKEL»
T. Shabelnikova, L. Yakovleva
SESSION 6
PHYSICAL PROPERTIES OF MATERIALS
Chairpersons: V. Kazantsev, UNIIM (Russia)
S. Novakov, UECC, (Russia)
About the necessity of developing the multiparametric reference materials of thermophysical properties
E. Ermakova et al.
Resistivity reference materials — state of art and future
S. Kobeleva, G. Terentiev, L. Kholodniy
Оn the possibility of developing CRM of lifetime of non-equilibrium charge carriers of monocrystalline silicon
S. Kobeleva, I. Schemerov
SESSION 7
NANO MATERIALS
Chairpersons: E. Sobina, UNIIM (Russia)
А. Lisunova, МC Rosnano (Russia)
The new nano silver reference material BAM-N001
Bremser W., Bienert R., Menzel M., Girod M., Rolf S., Thünemann A. F., Emmerling F.
Ensuring the uniformity of measurements of specifications of porosity of firm substances and materials
E. Sobina
SESSION 8
QUALITY MANAGEMENT SYSTEM OF PRODUCERS, SUPPLIERS OF REFERENCE MATERIALS
Chairpersons: Е. Оsintseva, UNIIM (Russia)
W. Bremser, BAM (Germany)
The first experience of accreditation of the domestic reference materials producers in the international system ILAC-MRA APLAC. What is it: achievement or next problem?
A. Atanov, V. Pripisnova
Quality management system of producers and suppliers of reference materials
E. Osintseva
Accreditation for the compliance with ISO Guide 34-2009 is a new important stage of confirmation of competence of the institute of reference materials
Holcombe G. , Firth J.
Accreditation for the compliance with ISO Guide 34-2009 is a new important stage of confirmation of competence of the institute of reference materials
V. Stepanovskikh, S. Fiodorova, М. Tretyakov
Quality management system of the producer of certified reference material of minerals
M. Lebedeva, M. Moshkova
SESSION 9
USES OF RM, RM IN PROFICIENCY TESTING
Chairpersons: O. Ponimareva, UNIIM (Russia)
N. Kovaleva, Ekochim (Russia)
Features of the production and use of reference materials of oil and petroleum products
A. Kolesnikov, C. Eldetcova
The use of reference materials for interlaboratory comparison tests
Shpakov S.V.
Reference material role when conducting comparisons
M. Krasheninina, M. Medvedevskih, L. Neudachina, E. Sobina
The use of reference materials for quality assurance of analytical measurements
Beloborodova G., Ponomareva О. et al.
Comparison of reference sample measurement results between radiation monitoring laboratories at FGUP MAYAK PA
E. Murashova , S. Levunin et al.
Assessment of the capabilities to use different methods in the certification of reference materials for composition of milk formula
O. Kremleva, T. Tabatchikova et al.
SESSION 10
NEW MEASUREMENT METHODS, MEASUREMENT PROCEDURES, INSTRUMENTS
Chairpersons: L. Karazhova, Tyumen CSM (Russia)
A. Letov,VIAM (Russia)
New aspects of the use of the method of coulometric titration at GET 176-2010
A. Shimolin, V. Zyskin et al.
Technique for the heavy element mass distribution measurement in the target
Yu. Leshchenko, A. Leshchenko, Yu. Kushnir et al.
Dynamic methods and means for metrological providing continuous metrological gas analitical measurments
Z. Baskin
Certified reference materials as an effective means of control for testing and verification of measuring instruments
T. Grigorieva, S. Plasunova
Stable source microflows gases and vapors Simgp "MIKROGAZ."
Z. Baskin
The methods and tools study for producing multi-parameter reference materials of composition and properties of the coatings
V. Kazantsev, A.Vasilyev
Development of certified reference materials оf propagation velocity of ultrasonic waves in solid materials
Terentiev G., N.Gerasimova et al.
РOSTER SESSION
Long term participation in a proficiency test scheme for radionuclides determination in water
Gonzaga C.L., Bacchi M.A., De Nadai Fernandes E.A., Sarriés G.A.
Certified reference materials for рН-meters calibration – production and application
Dimitrova L.P., Kotzeva B.G., Chipanova R.V.
Assessing the homogeneity of a tomato candidate reference material by neutron activation analysis
Kato L.S., De Nadai Fernandes E.A., Bacchi M.A., Martínez M.I.V., Elias C., Sarriés S.R.V., Sarriés G.A., Gonzaga C.L.
Development of the certified reference material BAM-D001 for particle size distribution measurement by laser diffraction methods
Gemeinert M., Kuchenbecker P., Rabe T.
Porous CRM OF BAM - covering surface areas from 0.2 TO 1000 M2/G
Zimathies A., Prinz C., Emmerling F.
Reference standards as a basis for pharmacopoeia analysis
A.Mironov, I.Sakaeva, E.Sakanian, T.Shemeryankina
The use of СRMs of moisture mass fraction in dried dairy products for metrological assurance of ice-cream moisture measurements
Е. Parfenova et al.
Development of certified reference material of citric acid
O. Kremleva et al.
Condition and prospects of facilities development to ensure traceability of measurement results in soil science and agrochemistry in Ukraine
Y. Borodina, M. Lazebnaya
Development and application of certified reference materials of soils containing organic toxicants by controlling services
M. Lunev, L. Chilikina, V. Vasilenko et al.
Creation and use of reference materials and spectral measurement standards of natural objects for natural works in geology
I. Vaganov, B. Funtikov
Certification of coal ash reference materials
E. Tsukhanova S. Shushunova
Evaluation of life time of reference materials for composition of metal ion solutions
М. Dombrovskaya, D. Lisienko
Comparison of methods for estimation of the metrological characteristics of samples of milk with preset levels of content of toxic elements
I. Gromov
Nessesity of developing reference materials for qaulity assurance of cytokine preparations
T. Nikitina, L. Gayderova, O. Fadeykina
Verification of the measurement procedure of plant materials composition by x-ray fluorescent analysis with synchrotron radiation
Yu. Markоva, E. Anchutina, E. Kerber et al.
Reference materials in house of metallurgical сomplex materials
E. Kotlyarevskaya, E. Chikantseva, O. Erkhova
Certified reference materials for enterprises of non-ferrous metallurgy in Ukraine and CIS countries
A. Suschinsky, V. Pryakhina et al.
Certification of trace substances in steel certified reference materials by AAS with the hydrides generation
G. Popkova, S. Fedorova
Certified reference materials for the Novoangarsky mine mineral processing and product quality assurance
S. Prokopieva, Y. Stupakova
The development of the new sets of CRMs for spectral analysis of cast irons
G. Samarina, T. Ignatenko
Neutron-activation analysis of rare and precious metals in carbonaceous objects and reference materials
D. Kabanov, Yu. Nesterova
Application of standard solutions for analyzers calibration in determining nitrogen and oxygen in steel reference materials
J. Shahova, T. Endeberya, S. Fedorova
Reference materials for thermofhysical properties of solids. Experience in creation and use
V. Kazantsev, V. Cherepanov, V. Sennikova
Development of universal GSO sets for checking of magnetic defectoscopes
A. Sobolev, V. Malyuk, S. Plyasunova
The release of new types of state CRMs of ferrous metallurgy materials
V. Kozmin., M. Shchukina, M. Kozmin
Comprehensive characterization of colloidal alumina, titania, silica, and zinc oxide reference materials
A. Lizunova, A. Efimov, A. Loshkarev, D. Skidin, I. Volkov, V. Ivanov
ICRM - proficiency testing provider through interlaboratory comparison
E. Kolpakova, V. Stepanovskikh, R. Novikova
The experience in the use of petroleum reference materials in the course of interlaboratory comparison tests in Udmurt Republic
L. Тrubacheva, S. Lohanina
he use of specially created native reference materials of soil in conducting internal audit of measurement results
L. Тrubacheva, S. Lohanina, A. Trubachev
Metrological characterization of analytical methods for speciation analysis of HG
Kotzeva B., Karadjova I.
Application voltammetric analyzer TA-4 in the analysis оf reference materials ferrous metallurgy
S. Tiunova, A. Lastochkina et al.
Providing information on reference materials in Russia
S. Agisheva
Journal «Reference materials» - a source of information support in the field of development, creation and application of reference materials
N. Taraeva
Databases of interstate certified reference materials and certified reference materials of COOMET
O. Anfilatova
The problems of standardization of measuring methods of quantitative chemical analysis of мetallurgical materials
T. Ignatenko, E. Kotlyarevskaya
Development of reference materials of magnetic power loss for calibration magnet measurement equipment
V. Malyuk, V. Kataev