PROGRAMME 2018

2020 2018 2015 2013
III INTERNATIONAL SCIENTIFIC CONFERENCE
REFERENCE MATERIALS IN MEASUREMENT AND TECHNOLOGY

September 11-14, 2018, Ekaterinburg, Russia
Reference materials of the Russian Federation: Strategy of ensuring the uniformity of measurements until 2025
Medvedevskikh S. V., Kremleva O. N.
Abstract

On calibration and measurement capabilities of COOMET national metrological institutes in the field of physical and chemical measurements
Konopelko L. A., Kustikov Y. A., Okrepilov M. V., Pronin A. N.
Abstract

International cooperation in the field of reference materials for laboratory medicine
Baturin А. S., Muravskaya N. P.
Abstract

State Register of approved type reference materials of the Russian Federation
Agisheva S. A., Kremleva O. N., Suslova V. V.
Abstract

The state of affairs and problematic issues in conducting ILC at medical laboratories
Malakhov V. N.
Abstract

Activity of VNIIFTRI in the field of physical-chemical measurements
Dobrovolskiy V. I., Oganyan N. G., Prokunin S.V.
Abstract  Article

SESSION 1
INTERNATIONAL SESSION
Chairperson: Wolfram Bremser, BAM, Германия
Forthcoming Endeavours of ISO/REMCO
Wolfram Bremser
Abstract

Harmonised guidance for the producers and users of reference materials –
the current status and future prospects
Angelique Botha
Abstract

Evaluating long-term capability in primary pH metrology using techniques of the CCQM key comparisons in pH
Kenneth W. Pratt
Abstract
Combined measurement uncertainty for pH-values using certified reference materials in potentiometric measurements with glass electrodes
Samuel Wunderli
Abstract  Article
Bayesian methods in the certification of reference materials
Adriaan M.H. van der Veen
Abstract
COMAR, where do you go?
Johannes van de Kreeke, Rita Pradel
Abstract
Conformity assessment of multicomponent materials – who and why takes risks?
Ilya Kuselman, Francesca R. Pennecchi, Ricardo J. N. B. da Silva, D. Brynn Hibbert
Abstract
Validation of methods for the determination of qualitative properties
Wolfram Bremser, Wulf Menzel
Abstract
SESSION 2
GENERAL ISSUES IN THE FIELD OF REFERENCE MATERIALS
Chairperson: Olga N. Kremleva, UNIIM, Russia
Falsification of certified reference materials. How to identify and how to fight?
Pripisnova V. A., Atanov A. N.
Abstract

Interlaboratory comparison tests – the main tool of competence assessment
Belov A.V.
Abstract

VNIIFTRI’s participation in international comparisons in the field of physical-chemical measurements
Dobrovolskiy V.I., Oganyan N.G., Prokunin S.V., Stakheev A.A.
Abstract  Статья EN

Analysis of the industry base of certified reference materials of mineral raw materials
Lebedeva M. I., Kit A. Yu.
Abstract

Procedures for the management of reagents and reference materials at the laboratory in accordance with ISO/IEC 17025:2017
Falkin D.V.
Abstract

Experience in implementing a quality system of the ores and rocks reference material producer in Minstandarts
Moshkova M. V., Demchenko A. S.
Abstract

Problem of comparability of characteristics of certified reference materials – gas mixtures of the same kind, produced by different enterprises
Konopelko L.A., Kolobova A.V., Fatina O.V.
Abstract  Article
SESSION 3
GEOLOGY, METALLURGY
Chairperson: Irina E. Vasil’eva, IGC SB RAS, Russia
Multiparametric reference materials required for analysis of geological samples on precious metals
Vasil’eva I. E., Shabanova E. V., Dreglea A. I.
Abstract
Development, production, testing and use of certified reference materials for metallurgical production
Stepanovskikh V. V.
Abstract
Reference material producer – VIMS: key aspects of ensuring the quality of certified reference materials of solid mineral resources
Lebedeva M. I.
Abstract
Production and certification of reference materials of boron mass fraction in silumin
Lisienko D. G., Dombrowskaya M. A., Kubrina E. D.
Abstract  Article
Development of a certified reference material of hydrogen mass fraction in titanium hydride
Zasukhin A. S., Sobina E. P., Migal P. V.
Abstract

Technique of controlling the content of Ce and Gd in YGAG:Ce powders by means of inductively coupled plasma mass spectrometry
Lisovskii S. V.
Abstract   Статья EN

SESSION 4
MEDICINE, PHARMACEUTICALS
Chairperson: Elena V. Kulyabina, VNIIMS, Russia
Problems of reference materials of biological medicinal products
Olefir Y. V., Volkova R. A., Fadeikina O. V., Sakanyan E. I., Merkulov V. A., Movsesyants A. A., Bondarev V. P.
Abstract

Development of reference materials in the laboratory medicine.
Reference materials of electrolytes in the blood serum
Griazskikh N. Yu., Yermakova Y. I., Zyablikova I. N., Ivanov A. V.
Abstract

Application of raman spectroscopy with the purpose of drugs quality control in injection form
Krasheninina M.P., Medvedevskikh M.Yu., Il’ina Е.V., Galeev R.R.
Abstract  Article
Reference materials to assess specific safety of preparations of immunoglobulins, and human albumin: development, validation and application
Kornilova O. G., Krivykh M. A., Volkova R. A., Borisevich I. B.
Abstract  Article
Reference materials of catalytic activity as a means of providing the metrological traceability of measurement results. KATAL
Kulyabina E. V., Melkova O. N., Guskova E. A.
Abstract  Article
SESSION 5
REFERENCE MATERIALS OF PHYSICAL PROPERTIES
Chairperson: Egor P. Sibina, UNIIM, Russia
Development of certified reference materials set of magnetic properties of hard magnetic materials based on NdFeB alloy
Volegova Е. A., Maslova Т. I., Malygin М. A., Vas`kovskiy V. O., Volegov A. S.
Abstract  Article
Absorbed dose rate and absorbed dose transfer reference materials with dose measurement possibilities ranging from 50 to 1000 Gy
Emelyanenko I. A., Tenishev V. P..
Abstract  Article
Multiparametric certified reference materials used for metrological support of coating parameters
Kazantsev V. V., Vasilyev A. S.
Abstract  Article
New certified reference materials of liquid viscosity
Neklyudova A. A., Demyanov A. A.
Abstract  Статья EN
Validation of the test procedure for stretching in line with GOST 10446 with the use of a reference material of wire for quality control
Matveeva I. N., Tolmachev V. V.
Abstract
Perspectives of developing reference materials of thermodynamic properties for metrological support in the field of thermal analysis and calorimetry in the Russian Federation
Nepomiluev A.M., Kazantsev V.V., Shipitsyn A.P.
Abstract   Article
Development of reference materials for porosity based on aluminium oxide for the method of mercury porosimetry
Sobina E.P.
Abstract  Article
Metrological assurance of infrared analyzers of grain
Parfenova E. G., Molodykh S. N.
Abstract  Статья EN
Development of a certified reference material of the physical properties of soil clay (loam)
Matveeva I. N., Tolmachev V. V.
Abstract  Article
SESSION 6
QUALITY OF LIFE
Chairperson: Мaria Yu. Medvedevskikh, UNIIM, Russia
Metrological assurance for dioxin measurements. Development of a new certified reference material of dioxin mass fraction in animal fat
Budko A. G., Mikheeva A. Yu., Krylov A. I.
Abstract  Article
On the development of a certified reference material of gluten
Krasheninina M. P., Sergeeva A. S., Medvedevskikh M. Yu., Miluyshkin A. L., Shatalov I. S.
Abstract

A new multielement reference material for composition of pine needles
Shabanova E. V., Vasil’eva I. E., Zak A. A., Mustafina O. K.
Abstract

Development of interlaboratory comparison samples and reference materials for the quality assurance of air composition measurements
Bogacheva A. M.
Abstract   Article

Reference materials on the natural basis in the fuel and energy complex of the Russian Federation
Eldetsova S. N., Kolesnikov A. F.

On the development of reference materials of food quality indicators
Medvedevskikh М. Yu., Krasheninina М. P.,  Sergeeva A. S., Nikonova N. A.
Abstract
SESSION 7
METROLOGICAL TRACEABILITY
Chairperson: Alena V. Sobina, UNIIM, Russia
Development of a certified reference material of 0.1 M potassium dichromate solution GSO 10992-2017
Shimolin A. Yu., Sobina A. V.
Abstract Article

Development of reference materials in the field of physical and chemical analysis. Reference materials for composition of aluminum, india, magnesium, nickel and titan aqueous ion
solutions
Ermakova I. I., Ivanov A. V., Zyablikova I.N., Shobina A. N.
Abstract  Article

Development of certified reference materials for mass fraction of elements in solid matrix for metrological assurance of x-ray fluorescence and atomic emission analysis
Kuznetsova M. F., Sobina A.V.
Abstract
Isotope dilution mass spectrometry in the development of reference materials
Kremleva O. N., Tabatchikova T. N.
Abstract Article
Development and certification of ICP standard solution of lead
Stolboushkina T. P., Stakheev A. A.
Abstract  Article
Proficiency testing with the established traceability to the national primary standard GET 176-2017
Sobina A. V.
Abstract
SESSION 8
MATHEMATICAL AND STATISTICAL SUPPORT FOR THE  CHARACTERIZATION OF REFERENCE MATERIALS
Chairperson: Vyacheslav V. Kazantsev, UNIIM, Russia
Creation of a system for automatic monitoring and accounting of pollutant discharges into water objects
Medvedevskikh S. V., Kazantsev V. V., Medvedevskikh М. Yu., Sergeeva A. S.
Abstract
Evaluation of uncertainty of the certified value of multicomponent reference material
Migal P. V., Medvedevskikh S. V., Firsanov V. A.
Abstract  Article
Methodological approaches to statistical evaluation of test results obtained during certification of reference materials used for biologicals quality evaluation
Fadeikina O. V., Volkova R. A.
Abstract
Estimation of consensus value of interlaboratory measurement results with minimum increase of associated uncertainty
Aronov P. М., Kremleva О. N.
Abstract  Article
Estimation of material preparation quality of certified reference materials of solid wet substances
Medvedevskikh S. V., Krasheninina М. P., Medvedevskikh М. Yu.
Abstract  Article
SESSION 9
APPLICATION ISSUES OF REFERENCE MATERIALS
Chairperson: Yuriy S. Bessonov, UNIIM, Russia
Use of bismuth-containing glassy reference materials for the determination of transition elements by the luminescence  method
Borisova V. V., Kutvitsky V. A., Mironova E. V.
Abstract  Article

Evaluating the effectiveness of corrective actions at the laboratory of non-destructive control
Zabelina A. A., Tolmachev V. V.
Abstract

Techniques for ambient air monitoring. Certification and organization of the intralaboratory quality control of measurements conducted using reference materials
Kropanev A. Yu.
Abstract
External control of the quality of food composition measurements using interlaboratory comparison materials
Ponomareva O. B., Kotov M. V.
Abstract

The practical use of reference materials for verifying measuring instruments
Svistunov I. N., Gorbunov R. A., Levin A. E.
Abstract

The use of a reference material to solve problems in assessing the quality of electrical steel in accordance with the requirements of Russian and foreign standards
Serdjukov S. V., Maslova T. I.
Abstract

The use of a reference material of asphalt-concrete mixture in the evaluation of personnel skills at a road construction laboratory
Chentsova Yu. S., Tolmachev V. V..
Abstract

THE PROGRAMME OF POSTER SESSION
Organization of interlaboratory comparisons for determining the indicators of the composition and properties of drinking, natural and purified waste water using reference materials
Goryaeva L. I., Fatkulina E. K.
Abstract

Development of a certified reference material for determining total alkalinity of natural water
Goryaeva L. I., Shchukina E. P., Fatkulina E. K.
Abstract

Reference materials used in the veterinary field
Gulyaeva A.Yu., Kis I. V., Kolyachkina S. V., Komarov A. A.
Abstract

Reference materials of the composition and properties for determination of quality parameters of petroleum and petroleum products
Demyanov A. A., Neklyudova A. A.
Abstract

Experience of an accredited laboratory in interlaboratory comparisons
Zelenkova A. V., Prokopyeva S. V., Stupakova E. V.
Abstract

On improving the accuracy of producing certified reference materials of iron (III) and copper (II) ion solutions
Zyskin V. M., Sobina A. V.
Abstract

On the development of certified reference materials for melting point of high-purity organic substances
Kazartcev Ya. V., Korchagina E. N., Mishina K. A., Shehovtsov D. A.
Abstract

Metrological support of gas adsorption analysis
Koryukova V.A., Sobina E.P.
Abstract

Possibility of developing a reference procedure or primary reference procedure to ensure traceability of measurements for mercury in gas media
Maksakova I. B., Smirnov V. V., Krylov A. I.
Abstract

Developing a certified reference material based on plutonium dioxide for total plutonium content
Marchuk A. Yu., Starovoytova O. V., Maximova I. M., Stepanova O. V.Tadevosyan Yu. A., Semyonov M. A., Chukhlantseva, E. V., Plekhanov V. V.
Abstract

The risk-based approach in the production of reference materials
Osintseva Е.V.
Abstract

Work on the production of certified reference materials, performed by Western-Siberian Testing Center in 2017-2018
Shushunova S. N.
Abstract

The activity of a specialized organization of the state service for reference materials of VNIItsvetmet institute
Yamchshikova L. N., Matyuschenko Ye. V.
Abstract